IQ8Quad detector base with relay contact output. Contact: floating NO or NC contact selectable via jumper. Settings on site: NO contact.
Provides a voltage-free contact controlled by the remote output of a detector
Draws negligible current
A lot of space for wire connection
Automatic closing of the loop bus wiring system for detector extraction
Detector extraction locking is enclosed in the base
| Current consumption | 5 µA (w/o detector, active relay) |
| Contact load relay | 30 V DC/1 A |
| Application temperature | -20 °C ... 72 °C |
| Storage temperature | -25 °C ... 75 °C |
| Connection terminal | Ø 0.6 mm to 2 mm² |
| Material | ABS |
| Air humidity | < 95 % (non-condensing) |
| Color | white, similar to RAL 9010 |
| Weight | approx. 80 g |
| Dimensions |
Ø: 117 mm H: 24 mm (incl. detector 62 mm)
|
Copyright © 2017 Safe Controls Sdn Bhd. All Rights Reserved. Developed by Lagenz.
