Addressable, completely bus supplied and short circuit / open circuit resilient alarm signaling device in compliance with EN 54-3 with up to 20 different programmable signaling tones including DIN tone in accordance with DIN 33404 Part 3 for acoustic alarm signaling. The volume can be set to 8 different levels. Its flat design enables optimum adaptation to the environments. It is made of shock and scratch resistant plastic. Optionally, bases Part No. 806202 with side cable entry and weatherproof protection can be installed.
Completely bus supplied alarm device
Powered loop compatible
Low power consumption
Up to 32 alarm devices for each powered loop
Each alarm device has built-in isolator
Tones can be used for other purposes in addition to warning of fire, making the device ideal for use in schools etc.
Soft start option, ideal for hospitals and nursing homes
Acoustic alarm signaling (dependent on type):
Acoustic pressure up to 99 dB(A) @ 1 m
Volume programmable in 8 steps via tools 8000
Up to 26 different languages are available
20 different signaling tones, including DIN tone
Multilingual speech alarm in 5 different languages
Alarm signaling, evacuation, and test alarm can each be programmed in different languages
Speech alarm, 5 pre-programmed alarm texts and other country-typical alarm signals
| Operating voltage | 8 ... 42 V DC (via powered loop) |
| Quiescent current @ 19 V DC | approx. 55 μA |
| Quiescent current @ FACP battery | approx. 300 μA @ 42 V |
| Sound level | 97 dB (A) +/- 2 dB @ 1 m |
| Ambient temperature | -5 °C ... 50 °C |
| Storage temperature | -10 °C ... 55 °C |
| Type of protection | IP 30 (IP 65 with socket 806201 / 806202) |
| Housing | ABS |
| Air humidity | < 95 % (non condensing) |
| Color | red, similar to RAL 3020 |
| Weight | approx. 300 g |
| Dimensions | Ø: 112 mm D: 75 mm |
| Ø: 112 mm D: 90 mm (with IP 65 base) |
Copyright © 2017 Safe Controls Sdn Bhd. All Rights Reserved. Developed by Lagenz.
