The new Vigilon Mains Switching Interface units connect directly to the Vigilon system
The interface units are designed to provide heavy duty relay switching for both 24V and 230V applications with contacts rated at 13A. This interface is particularly suitable for switching damper control units and other building controls requiring a high contact rating for mains shutdown.
The range comprises of 2 versions - The new single channel interface is a direct replacement for the existing 34415 Mains Switching Interface. The 4 channel interface is a new addition to the Vigilon Interface range. Both variants offer extended functionality.
• Flexible Input / Output
• Controlling outputs and monitoring inputs simultaneously (effectively, 8 channels)
• Configurable delay to filter noise and spurious signals
• Outputs can be individually sectored
• Single channel has 1 output and 4 inputs
• Inputs to be configured as fire, fault, supervisory or confirmation input
|
Output(s) Relay contact rating |
Resistive load: Single pole change over contacts rated 13A 230V ac Inductive load: 1hp @ 240V ac, 1/2hp 120V ac |
| Input(s) | Input can be normally open or normally closed switch |
| Modes of operation |
Input Output Input and Output Input with confirmation Output Output with confirmation Input |
| Maximum number per loop | 100 units per loop (of which only 8 can be individually programmed) |
| Relative humidity (non condensing) | Up to 95% |
| Ingress protection (estimated) | IP 31 |
| Storage temperature | -20º C to 70º C |
| Ambient operating temperature | -10º C to 45º C |
| Enclosure | ABS |
| Colour | Back box – Dark Grey Lid – Light Grey |
| Overall dimensions | 227mm x 245mm x 77mm (H x W x D) |
| Weight | 1.1Kg |
Copyright © 2017 Safe Controls Sdn Bhd. All Rights Reserved. Developed by Lagenz.
