Waterproof MCP suitable for esserbus and powered loop connection, with soft address coding, alarm latch and alarm indicator. Without BUS communication, the detector operates as conventional MCP. Detector housing, surface mount housing and transparent cover are included.
The Waterproof Manual Call Point has been designed for use outdoors and in places where moisture can occur. Surface mount housing is provided with knock-out cable entries for M20 cable glands (option) for simplified installation.
High IP protection class IP66
Integrated loop isolator
Triple key function (test, open, reset)
Plug-in connection clamps
Detectors that are not ready for operation can be marked with the "out of order" label by reversing the enclosed glass pane
| Operating voltage | 8 ... 42 V DC |
| Quiescent current @ 19 V DC | approx. 45 μA |
| Alarm current @ 9 V DC | approx. 18 mA |
| Alarm display | LED, red and yellow flag |
| Operation indicator | LED, green |
| No. of detector/zone | 10 detectors / group; 127 detectors / ring (according to VdS) |
| Application temperature | -20 °C ... 70 °C |
| Storage temperature | -30 °C ... 75 °C |
| Connection terminal | max. 1,5 mm² (AWG 30-14) |
| Type of protection | IP 66 |
| Housing | PC ASA plastic |
| Air humidity | < 95 % (non condensing) |
| Color | red, similar to RAL 3020 |
| Weight | approx. 250 g |
| Dimensions | W: 88 mm H: 88 mm D: 57 mm (with surface mount housing) |
Copyright © 2017 Safe Controls Sdn Bhd. All Rights Reserved. Developed by Lagenz.
